VCT Tile Prep

We went back and forth about flooring for a long time. For quite a while, we were convinced that we would do Marmoleum. I loved the idea of a seamless floor. But I did not love the colors that would have matched our interior of yellows and grays. The price tag is also a wopper. We were quoted $785 for the Marmoleum and adhesive. Ouch. 

So, after a lot of discussion on Vintage Trailer Talk and advice from Larry (Mobiltec), we decided to go with VCT tile.

But the decisions didn't stop there: pattern? colors?

Kirk had his heart set on basketweave pretty early on after seeing a photo of a vintage camper with a basketweave floor. Ok, that was easy. 

The colors took us some time to figure out. We discovered that even if a color is on the Armstrong site, it is not necessarily still available in stores. Some of the colors look true on line, some were way off. I am glad we bought samples before committing. In the end we got a white that has lovely flecks of yellow and gray, a gray that matches the flecks, and a yellow that matches the flecks.

So today we had to turn this: 



Into this:

Which made us look like this:


It took 414 cuts. We ended up using a finishing blade on our table saw. We tried some of the score and snap methods, including checking out a rental VCT cutter at Home Depot, but those methods created a rougher edge that would have meant needing to sand each edge. The edge we got with the finishing blade won't need any additional sanding.



It was a dusty, messy, job. Luckily, today was beautiful out and we were able to set up the table saw outside so less dust in the house. Thank you to our neighbors who tolerated our table saw being on for 2 hours.

I can't wait to see this the final pattern on the floor. 

Comments

Post a Comment

Popular posts from this blog

Connie's Cabinets

Image
The cabinets in a 1959 Shasta Airflyte are fabulous in the way mid century modern styling was fabulous. The edges are curved. There are scallops on the wall to wall shelf in the back that holds the canvas bunks. The cut outs for the wall to wall front cabinet are a swirly exercise in over the top beauty. We are saving everything we can. If there is a little discolored wood on the corners or edges from past water damage, so be it. We love the character. We don't want this trailer to look brand new, we want her to look loved.  The only cabinet that was not at all salvageable was the floor to ceiling closet. The pin hole in the roof just created too much soft and rotted (could go through it with a pencil) wood. We are completely rebuilding that cabinet from birch and poplar. So, let's take a tour of Connie's cabinets pre-disassembly in our 1959 Shasta Airflyte and see where we are today... Front cabinets. So much to love: the gas lamp, the chevron handles, the curves, the &quo
Read more

Discovery and Disassembly

Image
When we first bought Connie in October 2018, we knew there was some water damage. A ceiling panel had been placed over the vent area, but we could see the water damage peeking out. The first front and back wrap panels were overplayed with classic 70s fake wood paneling, nobody uses that stuff except to hide misdeeds. Most of the wood edges had some discoloration. But we naively thought, a few panels and we will be right as rain. Then we learned about lifting the skins and the thunderstorm hit.  Since winter was approaching we stuck our heads in the snow and decided to enjoy our time camping with our trailer. A frame off restore in a snow bank did not sound appealing, or even possible. We loved every minute camping in Connie. I know a lot of people say they never use the stove, but in a colder climate, there is nothing like a fresh batch of blueberry muffins out of the oven with snow on the ground outside. Summer of 2019 was a busy time, our son was getting married and moving across the
Read more

Finding Connie Shasta

Image
Well, that last post was in 2013 and a lot has changed. Our son is married and is pursuing his dream of being a luthier. We still plan on buying an Airstream and traveling full time.  But in 2018, on a tent camping trip around Lake Michigan, we found ourselves soggy and cold and searching Craigslist for a camper. We sent five emails to ads for vintage campers. Three had sold within an hour. One person never bothered to respond. One person responded that we could come take a look. We paid too much. We knew too little. We wouldn't change a thing. We enjoyed some camping trips, and learned a lot about canned ham construction online. We also made some discoveries And once we learned that canned ham trailers are built from the inside out (you need to take off all the metal to replace any inside panels), the game was on. We are all in and are going to take on a frame off restore. With our 8 foot wide driveway. And limited storage space. If we can do this, so can you. Look forward to seei
Read more